MIMO Channel Capacity and Configuration Selection for Switched Parasitic Antennas

Multiple-input multiple-output (MIMO) systems offer significant enhancements in terms of their data rate and channel capacity compared to traditional systems. However, correlation degrades the system performance and imposes practical limits on the number of antennas that can be incorporated into portable wireless devices. The use of switched parasitic antennas (SPAs) is a possible solution, especially where it is difficult to obtain sufficient signal decorrelation by conventional means. The covariance matrix represents the correlation present in the propagation channel, and has significant impact on the MIMO channel capacity. The results of this work demonstrate a significant improvement in the MIMO channel capacity by using SPA with the knowledge of the covariance matrix for all pattern configurations. By employing the “water-pouring algorithm” to modify the covariance matrix, the channel capacity is significantly improved compared to traditional systems, which spread transmit power uniformly across all the antennas. A condition number is also proposed as a selection metric to select the optimal pattern configuration for MIMO-SPAs.     

Analysis and control of micro-stepping characteristics of ultrasonic motor

Frontiers of Mechanical Engineering - Micro-stepping motion of ultrasonic motors satisfies biomedical applications, such as cell operation and nuclear magnetic resonance, which require a precise...     

三碳以下有机物高温氯化制备四氯乙烯

介绍了对三碳以下有机物进行高温氯化生产四氯乙烯的原理,分析了影响产品四氯乙烯收率的因素,并探讨了减少副产高沸物、增加四氯乙烯收率的措施。     

Investigation of the thermal behavior effect of the surrounding material environment on the swirling flame structure

This paper is focusing on the numerical simulation of a swirling flame, resulting from the interaction of multiple fires, evolving in a free and unlimited environment. A typical system, formed by a central fire source surrounded by four heat sources, is used. Since the thermal characteristic of the surrounding sources is the main engine for the rotation of flame, a detailed study is performed by varying the heating flux of these sources. This study shows that an increase of the heating flux of surrounding sources has as a result an intensification of the penetrating air puffs through the openings between the surrounding four heat sources. These puffs tangentially drive the central flame, thus producing a marked improvement on the angular momentum. Moreover, this study shows that the flame height is strongly affected by the flame rotation. Moreover, two different aspects of the flame height evolution are observed from the flow visualization and the thermal and dynamic fields for the different cases studied.     

Selecting supplier combination based on fuzzy multicriteria analysis

Existing multicriteria analysis (MCA) methods are probably ineffective in selecting a supplier combination. Thus, an MCA-based fuzzy 0-1 programming method is introduced. The programming relates to a simple MCA matrix that is used to select a single supplier. By solving the programming, the most feasible combination of suppliers is selected. Importantly, this result differs from selecting suppliers one by one according to a single-selection order, which is used to rank sole suppliers in existing MCA methods. An example highlights such difference and illustrates the proposed method.     

Optimal PMU placement considering topology constraints

A new optimization algorithm for optimal PMU configuration based on combination of graph theory and genetic algorithm is proposed. According to four topology reconstruction rules and three PMU configuration rules based on the graphic relationships between PMUs, constraints of PMU placement are put forward through topology constraint analysis, which dramatically limits the feasible solution space, thereby enhancing the algorithm speed. Meanwhile, an improved genetic algorithm based on serial number coding is presented to avoid infeasible solutions and improve the overall optimization performance. New corresponding crossover and mutation operator is also created. Examples show that the proposed algorithm performs very well and is highly valuable to large-scale networks.     

Numerical modelling and optimisation of natural convection heat loss suppression in a solar cavity receiver with plate fins

This study details the numerical modelling and optimization of natural convection heat suppression in a solar cavity receiver with plate fins. The use of plate fins attached to the inner aperture surface is presented as a possible low cost means of suppressing natural convection heat loss in a cavity receiver. In the first part of the study a three-dimensional numerical model that captures the heat transfer and flow processes in the cavity receiver is analyzed, and the possibilities of optimization were then established. The model is laminar in the range of Rayleigh number, inclination angle, plate height and thickness considered. In the second part of the study, the geometric parameters considered were optimized using optimization programme with search algorithm. The results indicate that significant reduction on the natural convection heat loss can be achieved from cavity receivers by using plate fins, and an optimal plate fins configuration exit for minimal natural convection heat loss for a given range of Rayleigh number. Reduction of up to a maximum of 20% at 0° receiver inclination was observed. The results obtained provide a novel approach for improving design of cavity receiver for optimal performance.     

Qualification of an ultrasonic flow meter as a transfer standard for measurements at Reynolds numbers up to 4×106 between NMIJ and PTB

The quality of any laboratory intercomparison depends to a large extent on the performance of the used flow meter. To find a flow meter that is capable of reaching a reproducibility better than 0.05% requires bounding all involved influence quantities down to the required level. The present paper describes the efforts performed while qualifying a time-of-flight ultrasonic flow meter as a transfer standard. It was determined that the most relevant influence quantity besides the flow profile within the bulk flow is the effect caused by the transducer pockets in the meter body. By taking advantage of a specially designed window chamber, it was possible to determine the magnitude of the errors introduced by the transducer pockets and to define, based on the findings, a procedure to perform a bilateral comparison between the hot water calibration facilities of the Physikalisch-Technische Bundesanstalt and the National Institute of Advanced Industrial Science and Technology. The results of the bilateral comparison are presented.     

Unreliable numbers: error and harm induced by bad design can be reduced by better design

Number entry is a ubiquitous activity and is often performed in safety- and mission-critical procedures, such as healthcare, science, finance, aviation and in many other areas. We show that Monte Carlo methods can quickly and easily compare the reliability of different number entry systems. A surprising finding is that many common, widely used systems are defective, and induce unnecessary human error. We show that Monte Carlo methods enable designers to explore the implications of normal and unexpected operator behaviour, and to design systems to be more resilient to use error. We demonstrate novel designs with improved resilience, implying that the common problems identified and the errors they induce are avoidable.